Above on the page there're some Tech PDF Manuals for MAXIMAL Forklift Trucks.
The upgraded Maximal A-series 2-3.5 t forklift trucks are designed with the operator in mind, with greater stability, lower noise levels, less vibration and a number of other features.
One of the main features of the new series is the dual suspension system.
The system includes full cab and transmission frame suspension, as well as a new engine vibration damper.
Maximal's R&D department has implemented this development on all A Series models to further reduce vibration levels.
The dual suspension system components replace the traditional rigid connections, greatly reducing the vibration of the forklift truck.
In addition, a special muffler and a new soundproofing material reduce the noise level by more than 4 dB.
It is worth noting that the damper, as well as all seals and gaskets used in the assembly of the forklift truck, are made of high quality rubber, which contributes to their greater strength.
The low center of gravity of the Maximal A-Series provides greater stability and also allows for greater rear visibility for the driver.
More specifically, the center of gravity is 50mm lower than on the Maximal M-series forklift models, and the low-mounted rear counterweight significantly increases the rear view angle and improves safety when reversing.
With regard to safety, the cabs of the Maximal A-series forklift trucks are equipped with a protective frame made of profiled steel.
This cabin design consists of three main parts: the left frame, the right frame and the upper grille.
The advantage of this solution is that both cab frames can be mounted directly on a standard cab structure.
This design allows the operator to greatly simplify the process of installing and removing the cab.
The ceiling of the cabin made of impact-resistant organic glass is installed on all forklift models, which, in addition to strength characteristics, creates a more stylish appearance of the forklift trucks.
The muffler and engine protection system significantly extends the service life of these units.
Using leading technologies and applying their own developments, Maximal designers directed their efforts to improve the comfort and controllability of warehouse equipment.
A special instrument panel with an LCD display provides easy control and monitoring of the main machine systems.
In Maximal A series forklift trucks, the steering wheel diameter is reduced to 300 mm.
This facilitates manipulation, the steering wheel responds faster to the actions of the operator, which ensures the mobility of the machine when working in a limited space.
In addition, the steering column adjustment device has been improved, the angle of which has been increased to 8° to improve driver comfort.